1. DAHNET - 3060 is a kind of compound deinking agent (Displector), is a synthetic surfactants. To make suitable for flotation of ink particles of air flotation have good adsorbability, and also has enough hydrophilic to ensure continued scattered small ink particles in suspension without settling on the fiber surface, so that these small ink particles by washing to remove later.
2. DAHNET - 3060 is not sensitive to industrial water hardness, so there is no need to supplement calcium, also won't produce calcium precipitation and scale, the danger of fiber loss is low.
3. The surfactant in the super DAHNET - 3060 emulsification, dispersion and flocculation etc can effectively eliminate the resin precipitation, to obtain high quality recycled fibers.
4. DAHNET - 3060 contained cationic surfactants in addition to ink, water-based ink removal of aniline with special performance, itself is a kind of anti-corrosion germicide, the pulp has very good bactericidal effect.
The product application
5. DAHNET - 3060 is suitable for the waste paper deinking manufacturers ink in the operation of removing in alkaline condition
6. DAHNET - 3060 concrete applicable conditions will be according to the actual circumstances of the individual manufacturers including raw materials, process flow, process conditions and the use of water be determined by the audi company engineer field.
7. DAHNET - 3060 basic applied conditions: the main factors influencing the effect of chemical pint of ink production condition, PH, temperature, etc. Technological design and the different types of production equipment, of course, also affect the performance of the chemicals, but the most important still is a component of waste paper. Audi, can provide different deinking agent in the production process, according to the use of the audi, engineering and technical personnel will provide the best way and the dosage, dosage of reference are as follows
(1), writing paper and office paper:
Sodium hydroxide: ensure the Ph: 9.5 to 10
DAHNET - 3060:0.2 0.25% (relative) tons of waste paper
Sodium silicate: 1-3% (according to the condition of the water)
Hydrogen peroxide: 0.7 1.0% (1.0% basis)
Temperature: 60 ℃
(2), the old newsprint
Sodium hydroxide: ensure the Ph: 9.5 to 10
DAHNET - 3060:0.06 0.1% (relative) tons of waste paper
Sodium silicate: 1-3% (according to the condition of the water)
40 ℃ temperature:
8. Safe and convenient use, this product is a liquid can be directly in front of the pulp inlet added or flotation cell added continuously. This product is suitable for the ONP MOW the OMG deinking of requirements.
9. The general properties:
Appearance: light yellow oily liquid
PH: 5-6
Relative density: 0.9-1.0
The packing and shipping store
DAHNET - 3060 plastic drum, 200 kg a barrel
Indoor storage to avoid direct sunlight
This product is a non-dangerous goods in ordinary chemical transportation way
One year warranty
